Optimum Touchless Decon Wash — Decontamination Wash

Optimum Touchless Decon Wash — pH-Neutral Touchless Decontamination Wash

Optimum Touchless Decon Wash is a powerful, versatile soap that combines three functions: touchless car washing, foaming pre-washing, and heavy-duty decontamination washing.

For routine maintenance, spray and rinse the product to remove light dust and dirt between contact washes. It can also be used as a powerful foaming pre-wash or as a decontamination wash with the Optimum Big Red Sponge, a towel, or a wash mitt before polishing or applying a ceramic coating.

Its concentrated, pH-neutral formula is suitable for all vehicle surfaces, including paint, plastic, glass, ceramic coatings, paint-protection film (PPF), matte finishes, and vinyl wraps. It breaks down tough dirt, grime, road film, and contamination without damaging the finish.

When used touchlessly for routine maintenance, it does not remove waxes or paint sealants. During a contact wash, it removes most waxes and sealants but does not remove or damage ceramic coatings.

Features

• Touchless wash: for vehicles with light dust and dirt.
• Foaming pre-wash: lifts and loosens dirt before the main wash.
• Heavy-duty decontamination: removes tough contaminants, road film, and grime during a contact wash.
• pH-neutral formula: safe for ceramic coatings, matte finishes, and PPF.
• Ceramic-coating preparation and maintenance: helps decontaminate surfaces before application or during maintenance.

Touchless Wash

1. Add 4 fl. oz. of product to 32 fl. oz. of water in a foam cannon.
2. Rinse the vehicle to remove loose dirt.
3. Apply foam to the vehicle and allow it to dwell for up to 5 minutes.
4. Rinse all soap completely from the surfaces.
5. Dry immediately with an Optimum Drying Towel or air blower to prevent water spots.
6. Rinse hands after use.

Touchless washing is intended for vehicles with light dirt or dust. Road film, grime, and stubborn contamination require a contact wash.

Decontamination Wash

1. Add 4 fl. oz. of product to 32 fl. oz. of water in a foam cannon.
2. Add 1 fl. oz. of product to 2 gallons of water in a bucket, then soak the Optimum Big Red Sponge.
3. Rinse the vehicle to remove loose dirt.
4. Apply foam and allow it to dwell for up to 5 minutes.
5. Wash the vehicle with the Optimum Big Red Sponge.
6. Rinse all soap completely from the surfaces.
7. Dry immediately with an Optimum Drying Towel or air blower.
8. Rinse hands after use.

Dilution Ratios — Product/Water

• Heavy-duty wash: 1 fl. oz. in 2 gallons of water.
• Foam cannon: 4 fl. oz. in 32 fl. oz. of water.
• Foaming sprayer: 2 fl. oz. in 32 fl. oz. of water.